Powered by Blogger.

Sneak Preview

Posted by Unknown at 6:30 PM
We have a new small sailboat taking shape in a remote workshop in rural North Carolina. It is a performance dinghy with a twist. It will be an exciting boat with a trapeze or two, or a ballast bulb can be added to the daggerboard to make a more docile small sportboat or family funboat. This is the first time that we are showing it anywhere public because it is not yet ready for plans sales. The design has taken a backseat due to pressure from other designs, so it has gone rather slowly


This hull shape was requested by my client, in preference to a simpler hard-chine or multi-chine hull form of stitch-&-glue hull construction. It is a direct development of the Didi Mini Mk3, scaled down to a smaller size.


This is a project that is suited to builders who have already built a stitch-&-glue boat or two and want to develop their skills further. It is built mostly with sheet plywood, to a shape that comes very close to those used for the latest breed of Volvo and other high performance raceboats, with a chine above a rounded bottom.


In these photos we have clamped the flat sheets to the framing on one side of the hull, to check that all fit correctly. This is a CNC kit, so we need to be sure that it goes together properly. The turn of the bilge will be skinned with two thinner layers laminated together to form a compound curve.

This first boat should be ready for the Wooden Boat Show in June 2012, at Mystic Seaport. Make plans to be there if you want to see her in the flesh.

See our design range at http://google.com .

0 comments:

Post a Comment

Subscribe to: Post Comments (Atom)